①紙箱廠基本條件:確定紙箱的長度、寬度和高度
① Basic conditions of carton factory: determine the length, width and height of carton
一般三層紙箱，紙的厚度在3.5mm左右，五層紙箱的厚度在7mm左右，所以你要測量你實際物品的長、寬、高。然后加上紙箱的厚度（在紙箱的高度盡量加0.5mm）。紙箱尺寸設計:一般是在寬度數據比較小的情況下，為了節省多的材料而設計的。所以根據你自己的貨，你一定要告訴紙箱廠你說的尺寸是外箱尺寸還是內箱尺寸。
Generally, the thickness of three-layer carton is about 3.5mm, and the thickness of five-layer carton is about 7mm, so you should first measure the length, width and height of your actual articles. Then add the thickness of the carton (try to add 0.5mm to the height of the carton). Carton size design: it is generally designed to save more materials when the width data is relatively small. Therefore, according to your own goods, you must tell the carton factory whether the size you said is the outer box size or the inner box size.
②選擇紙箱的材料
② Select the material of the carton
根據我們自己貨物的重量和我們自己的成本，我們應該合理地選擇紙箱的材料。我們的普通紙箱是由瓦楞紙板、瓦楞紙板離型紙、瓦楞紙、芯紙和內紙制成的；每重量越重，質量越好。紙的克重是120g、140g、170g、200g、250g。
According to the weight of our own goods and our own cost, we should reasonably choose the materials of cartons. Our ordinary cartons are made of corrugated board, corrugated board release paper, corrugated paper, core paper and inner paper; The heavier the weight per square meter, the better the quality. The gram weight of paper is 120g, 140g, 170g, 200g and 250g.
③紙箱厚度的選擇
③ Selection of carton thickness
紙箱分三層五層七層九層。第三層的厚度約為0.3毫米，第五層的厚度約為0.7毫米，第七層的厚度約為0.9毫米..三樓也叫單坑，五樓也叫雙坑。強化和硬化紙箱的厚度是一樣的，只有硬度。
The carton is divided into three layers, five layers, seven layers and nine layers. The thickness of the third floor is about 0.3mm, the thickness of the fifth floor is about 0.7mm, and the thickness of the seventh floor is about 0.9mm.. the third floor is also called single pit, and the fifth floor is also called double pit. The thickness of strengthened and hardened cartons is the same, only hardness.
紙箱的承載能力主要取決于每層原紙的橫環抗壓強度，但層數越多，承載性能越好。
The bearing capacity of carton mainly depends on the transverse ring compressive strength of each layer of base paper, but the more layers, the better the bearing performance.
④打印問題
④ Print problem
一般來說，印刷表面積越大，成本越高。當然要看顏色的多少。紙箱一旦打印出來，就不能修改了。因此，我們必須與紙箱制造商多次確認打印的內容。一些小錯誤可以用和紙箱顏色一樣的不干膠貼或者溫水貼覆蓋，但是不夠美觀。盡可能給出準確的打印材料，監督紙箱生產廠家嚴格按照要求打印。
Generally speaking, the larger the printing surface area, the higher the cost. Of course, it depends on the color. Once the carton is printed, it cannot be modified. Therefore, we must confirm the printed content with the carton manufacturer for many times. Some small mistakes can be covered with self-adhesive stickers or warm water stickers of the same color as the carton, but they are not beautiful enough. Provide accurate printing materials as far as possible, and supervise the carton manufacturer to print in strict accordance with the requirements.
The above highlights come from carton manufacturers, and more highlights come from: http://www.flyconn.cn Welcome to communicate with us.
